|
This page you are viewing is part of the SEVA Wiki Archive, Please visit the new Official Website! |
|
Difference between revisions of "File:InsightPlus-Main Plate-Center4.png"
(Combination eMachine Shop part views and dimensions for single or multi-plate Etek and reduction housing. Two Eteks are bolted to the Main Plate at each end with a chain from each driving one of the rear wheels, axles exiting between the motors. A secon) |
(No difference)
|
Revision as of 14:59, 10 February 2006
Combination eMachine Shop part views and dimensions for single or multi-plate Etek and reduction housing.
Two Eteks are bolted to the Main Plate at each end with a chain from each driving one of the rear wheels, axles exiting between the motors. A second set of Eteks are mounted to an opposing plate and the facing motors are coupled. A Center Plate may be required at the half shaft to support the inner bearing and it would be advantageous to somehow clutch these large sprockets.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 14:02, 1 March 2006 |  | 1,100 × 831 (336 KB) | Rjf (talk | contribs) | again? |
| 14:00, 1 March 2006 | No thumbnail | (336 KB) | Rjf (talk | contribs) | updated | |
| 16:14, 10 February 2006 | No thumbnail | (192 KB) | Rjf (talk | contribs) | new dimensions | |
| 14:59, 10 February 2006 | No thumbnail | (174 KB) | Rjf (talk | contribs) | Combination eMachine Shop part views and dimensions for single or multi-plate Etek and reduction housing. Two Eteks are bolted to the Main Plate at each end with a chain from each driving one of the rear wheels, axles exiting between the motors. A secon |
You cannot overwrite this file.
File usage
The following 4 pages use this file:
