|
|
| (107 intermediate revisions by 6 users not shown) |
| Line 1: |
Line 1: |
| − | This is all entirely unofficial and I am not modifying the Prius untill the Insight is back on the road.
| + | #redirect [[EAA-PHEV:Prius Modifications]] |
| − | | |
| − | http://autos.groups.yahoo.com/group/toyota-prius/message/75790
| |
| − | | |
| − | == Reminder Light Reset ==
| |
| − | *Cycle ODO/TRIP, stopping on ODO.
| |
| − | *Power off
| |
| − | *Power on, while holding the ODO button
| |
| − | **wait for reminder light to go out, then release.
| |
| − | | |
| − | | |
| − | == Disabling Reverse Beep ==
| |
| − | *Cycle ODO/TRIP, stopping on ODO.
| |
| − | *Power off
| |
| − | *Power on, within 6 seconds, hold ODO for at least 10 seconds.
| |
| − | *While still holding ODO shift into Reverse and back into Park.
| |
| − | *"b-on" shows on display, press ODO to cycle to "b-off".
| |
| − | | |
| − | | |
| − | == Disabling Traction Control ==
| |
| − | * Follow the sequence below (quickly - within 60 seconds)
| |
| − | * Set Ign switch to ON (Power button twice)(do not start to READY)
| |
| − | * Whilst still in "P" floor the gas pedal two times
| |
| − | * Select "N" floor the gas pedal two times.
| |
| − | * Select "P" floor the gas pedal two times.
| |
| − | (LCD display will indicate a !Car! in upper left corner of screen)
| |
| − | * Turn key directly to "start" to start the engine (brake+start)
| |
| − | | |
| − | | |
| − | == EV mode H14/#27 ==
| |
| − | info@edrivesystems.com
| |
| − | Get an "EnergyCS CDU"!!
| |
| − | | |
| − | == Tachometer ==
| |
| − | No can do, unless you know otherwise, OBD info is probably as close as it gets.
| |
| − | | |
| − | == Touch screen diags ==
| |
| − | * Hold "Info" button while turning the lights on and off 3 times.
| |
| − | * While in the 'Diagnosis Menu', pressing the upper-left corner than the lower-right corner on the screen will give you the 'Pdm' menu
| |
| − | * Tru the 3x light switch again while in Pdm screen.
| |
