This page you are viewing is part of the SEVA Wiki Archive, Please visit the new Official Website!
NOTICE: Visit the Maillist page for help joining the new google groups email list, the old maillist is no more.
SEVA meetings are held every second Tuesday.


User:Rjf/Open-EVSE/Build Photos 1

From SeattleEVA
< User:Rjf‎ | Open-EVSE
Revision as of 13:09, 13 January 2013 by Rjf (talk | contribs) (New page: ==== Build Photos ==== <Gallery> Image:20121220 003836.jpg|Components mounted to internal enclosure plate. Image:20121220 005325.jpg|AC Line and AC Test wires soldered to relay Image:20121...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Build Photos

  • Components mounted to internal enclosure plate.

  • AC Line and AC Test wires soldered to relay

  • Leads to be soldered on to ground fault coil.

  • Internal AC connected to terminal blocks.

  • Mock up of Open-EVSE board connections.

  • Internal Plate mounted inside enclosure.

  • Open-EVSE mounted and wired.

  • Created crimp connectors for use with terminal block.

  • Crimps attached to the J1772 cable for easy installation and removal.

  • AC input and J1772 output cabled attached.

  • View of stand offs attached to LCD Display

  • LCD Display is attached to a piece of scrap plastic.

  • Closeup of LCD Display standoffs.

  • LCD Display attached to long standoffs and connected to Open-EVSE.

  • L6-30 Extension cable converted into adapter cable and plug for EVSE.

  • Powered up and working!!

  • 220vac 50A plug, plus 220vac L6-30A, plus Xphase 110vac and Yphase 110vac.

  • Creating a face plate for the 2 gang 110vac 20A + L6-30A outlets.

Retrieved from "https://www.seattleeva.org/mw/index.php?title=User:Rjf/Open-EVSE/Build_Photos_1&oldid=8972"