|
This page you are viewing is part of the SEVA Wiki Archive, Please visit the new Official Website! |
|
Difference between revisions of "User:Rjf/Open-EVSE/Build Photos 1"
(moved non-build-related images to new section.) |
(→Build Photos of Enclosure 1: replaced image with an overall better image that still fits the description.) |
||
| Line 15: | Line 15: | ||
Image:20121220 094007.jpg|Closeup of LCD Display standoffs. | Image:20121220 094007.jpg|Closeup of LCD Display standoffs. | ||
Image:20121220 094353.jpg|LCD Display attached to long standoffs and connected to Open-EVSE. | Image:20121220 094353.jpg|LCD Display attached to long standoffs and connected to Open-EVSE. | ||
| − | Image:20121220 094421.jpg|L6-30 Extension cable converted into adapter cable and plug for EVSE. | + | <!--Image:20121220 094421.jpg|L6-30 Extension cable converted into adapter cable and plug for EVSE.--> |
| + | Image:20130101 003719.jpg|L6-30 Extension cable converted into adapter cable and plug for EVSE. | ||
Image:20121220 094550.jpg|Powered up and working!! | Image:20121220 094550.jpg|Powered up and working!! | ||
</Gallery> | </Gallery> | ||
Latest revision as of 03:22, 15 January 2013
Build Photos of Enclosure 1
Components mounted to internal enclosure plate.
AC Line and AC Test wires soldered to relay
Leads to be soldered on to ground fault coil.
Internal AC connected to terminal blocks.
Mock up of Open-EVSE board connections.
Internal Plate mounted inside enclosure.
Open-EVSE mounted and wired.
Created crimp connectors for use with terminal block.
Crimps attached to the J1772 cable for easy installation and removal.
AC input and J1772 output cabled attached.
View of stand offs attached to LCD Display
LCD Display is attached to a piece of scrap plastic.
Closeup of LCD Display standoffs.
LCD Display attached to long standoffs and connected to Open-EVSE.
L6-30 Extension cable converted into adapter cable and plug for EVSE.
Powered up and working!!
