This page you are viewing is part of the SEVA Wiki Archive, Please visit the new Official Website!
NOTICE: Visit the Maillist page for help joining the new google groups email list, the old maillist is no more.
SEVA meetings are held every second Tuesday.


Difference between revisions of "User:Rjf/Open-EVSE/Build Photos 1"

From SeattleEVA
Jump to navigation Jump to search
(moved non-build-related images to new section.)
Line 17: Line 17:
 
Image:20121220 094421.jpg|L6-30 Extension cable converted into adapter cable and plug for EVSE.
 
Image:20121220 094421.jpg|L6-30 Extension cable converted into adapter cable and plug for EVSE.
 
Image:20121220 094550.jpg|Powered up and working!!
 
Image:20121220 094550.jpg|Powered up and working!!
−
Image:20121222 034723.jpg|220vac 50A plug, plus 220vac L6-30A, plus Xphase 110vac and Yphase 110vac.
 
−
Image:20121222 035812.jpg|Creating a face plate for the 2 gang 110vac 20A + L6-30A outlets.
 
 
</Gallery>
 
</Gallery>

Revision as of 13:29, 13 January 2013

Build Photos of Enclosure 1

  • Components mounted to internal enclosure plate.

  • AC Line and AC Test wires soldered to relay

  • Leads to be soldered on to ground fault coil.

  • Internal AC connected to terminal blocks.

  • Mock up of Open-EVSE board connections.

  • Internal Plate mounted inside enclosure.

  • Open-EVSE mounted and wired.

  • Created crimp connectors for use with terminal block.

  • Crimps attached to the J1772 cable for easy installation and removal.

  • AC input and J1772 output cabled attached.

  • View of stand offs attached to LCD Display

  • LCD Display is attached to a piece of scrap plastic.

  • Closeup of LCD Display standoffs.

  • LCD Display attached to long standoffs and connected to Open-EVSE.

  • L6-30 Extension cable converted into adapter cable and plug for EVSE.

  • Powered up and working!!

Retrieved from "https://www.seattleeva.org/mw/index.php?title=User:Rjf/Open-EVSE/Build_Photos_1&oldid=8979"