This page you are viewing is part of the SEVA Wiki Archive, Please visit the new Official Website! |
|
Difference between revisions of "Charging Stations"
(copy edit from private wiki) |
(move to left) |
||
Line 5: | Line 5: | ||
== J1772 == | == J1772 == | ||
− | [[Image:SAE J1772 7058855567.jpg|thumb| | + | [[Image:SAE J1772 7058855567.jpg|thumb|left|SAE J1772-2009 EV connector]] |
SAE J1772 is a North American standard for electrical connectors for electric vehicles maintained by the Society of Automotive Engineers and has the formal title "SAE Surface Vehicle Recommended Practice J1772, SAE Electric Vehicle Conductive Charge Coupler”. It covers the general physical, electrical, communication protocol, and performance requirements for the electric vehicle conductive charge system and coupler. The intent is to define a common electric vehicle conductive charging system architecture including operational requirements and the functional and dimensional requirements for the vehicle inlet and mating connector. | SAE J1772 is a North American standard for electrical connectors for electric vehicles maintained by the Society of Automotive Engineers and has the formal title "SAE Surface Vehicle Recommended Practice J1772, SAE Electric Vehicle Conductive Charge Coupler”. It covers the general physical, electrical, communication protocol, and performance requirements for the electric vehicle conductive charge system and coupler. The intent is to define a common electric vehicle conductive charging system architecture including operational requirements and the functional and dimensional requirements for the vehicle inlet and mating connector. | ||
There are many commercially available J1772 options as well as methods to build your own, such as the [http://code.google.com/p/open-evse/ OpenEVSE Project] - Open Source Design for EVSE. | There are many commercially available J1772 options as well as methods to build your own, such as the [http://code.google.com/p/open-evse/ OpenEVSE Project] - Open Source Design for EVSE. | ||
+ | {{Clear}} | ||
=== Ryans Open-EVSE === | === Ryans Open-EVSE === | ||
− | |||
All of the OEM Replacement portable units and permanent home installation units appear to cost well over $1000. | All of the OEM Replacement portable units and permanent home installation units appear to cost well over $1000. | ||
So I decided to look into other options such as building my own. | So I decided to look into other options such as building my own. |
Revision as of 01:01, 31 December 2012
A Charging Station is not a Battery charger which is a component found onboard the vehicle. Rather a Charging Station is a place that can supply electric power to an electric vehicle. This can be as simple as a standard 110v or 220v outlet or a W:SAE_J1772 station.
J1772
SAE J1772 is a North American standard for electrical connectors for electric vehicles maintained by the Society of Automotive Engineers and has the formal title "SAE Surface Vehicle Recommended Practice J1772, SAE Electric Vehicle Conductive Charge Coupler”. It covers the general physical, electrical, communication protocol, and performance requirements for the electric vehicle conductive charge system and coupler. The intent is to define a common electric vehicle conductive charging system architecture including operational requirements and the functional and dimensional requirements for the vehicle inlet and mating connector.
There are many commercially available J1772 options as well as methods to build your own, such as the OpenEVSE Project - Open Source Design for EVSE.
Ryans Open-EVSE
All of the OEM Replacement portable units and permanent home installation units appear to cost well over $1000. So I decided to look into other options such as building my own. At this point I have built one of three units. I have yet to add true energy monitoring but intend to add that feature. Stay tuned as I update this information.
Parts List
Part | Source | Cost | Quantity | Link |
---|---|---|---|---|
Open EVSE Plus Board w/ integrated power supply | Open EVSE | $150.00 | 1 | http://code.google.com/p/open-evse/wiki/Ordering |
J-1772 cable, 30 amps (A3435-PEV) | Leviton | $133.98 | 1 | http://store.leviton.com/b/5742800011 +$12.19 shipping |
30A AC Plug L6-30 | Stay Online | $33.00 | 1 | http://www.stayonline.com/detail.aspx?ID=15695 Good for the plug and an adapter cable |
RELAY GEN PURPOSE DPST 30A 12V (PB486-ND) | Digikey | $13.03 | 1 | http://www.digikey.com/product-detail/en/T92P7D22-12/PB486-ND/365921 |
TRANSFORMER GROUND FAULT WIRE LD (582-1018-ND) | Digikey | $10.65 | 1 | http://www.digikey.com/product-detail/en/CR8420-1000-G/582-1018-ND/1045174 |
BOX NEMA ECONOMY 5.9X5.9X3.54 (377-1787-ND) | Digikey | $20.62 | 1e | http://www.digikey.com/product-detail/en/NBF-32210/377-1787-ND/2328559 |
PANEL INTERNAL 4.9" X 4.9" (377-1939-ND) | Digikey | $4.80 | 1e | http://www.digikey.com/product-detail/en/NBX-10984/377-1939-ND/439528 |
BOX ABS 7.62X4.47X2.47" TR BL (HM1056-ND) | Digikey | $9.35 | 1e | http://www.digikey.com/product-detail/en/1591XXETBU/HM1056-ND/2094794 Alternate Enclosure 6.0x3.3x2.0 $7.23 4.8x2.6x1.6 $5.40 |
2" plastic 4-40 M-F standoffs (4813K-ND) | Digikey | $0.63 | 8 | http://www.digikey.com/product-detail/en/4813/4813K-ND/255350 7/16" |
Terminal Blocks - Barrier Blocks | Digikey | ~$5.00 | 2 | euro 4x 30A 10-18AWG $1.77 euro 4x 30A 10-18AWG $1.49 euro 3x 30A 10-18AWG $1.31 |
FUSEHOLDER 1/4" 30A 250V PNL MNT (283-2850-ND) | Digikey | $3.69 | 2f | http://www.digikey.com/product-detail/en/BK%2FHKP-R/283-2850-ND/1024094 |
FUSE BLOCK 3AG 1POS SOLDER (F1497-ND) | Digikey | $1.13 | 2f | http://www.digikey.com/product-detail/en/03540001ZXGY/F1497-ND/553961 |
FUSE 250V SLO-BLO 3AB 30A (F1779-ND) | Digikey | $1.68 | 2f | http://www.digikey.com/product-detail/en/0326030.MXP/F1779-ND/778640 |
CIR BRKR THRM 30A PUSH-RESET (302-1268-ND) | Digikey | $5.37 | 2f | http://www.digikey.com/product-detail/en/1658-G21-01-P10-30A/302-1268-ND/659615 Replaces Fuses |
CONN TERMINAL STRIP 4CIRC 10MM (WM15910-ND) 10-18WG | Digikey | $1.77 | 2c | http://www.digikey.com/product-detail/en/39100-1004/WM15910-ND/809417 |
CONN TERMINAL STRIP 4CIRC 12MM (WM7725-ND) 8-20AWG | Digikey | $1.94 | 2c | http://www.digikey.com/product-detail/en/39100-1204/WM7725-ND/1280576 |
STANDOFF M/F HEX 4-40 NYL .250"L (4800K-ND) | Digikey | $0.397 | 8(10) | http://www.digikey.com/product-detail/en/4800/4800K-ND/255337 |
STANDOFF M/F HEX 4-40 NYL .500"L (4802K-ND) | Digikey | $0.442 | 0 |
http://www.digikey.com/product-detail/en/4802/4802K-ND/255339 |
STANDOFF M/F HEX 4-40 NYL 1.00"L (4806-ND) | Digikey | $0.476 | 0 | http://www.digikey.com/product-detail/en/4806/4806K-ND/255343 |
STANDOFF M/F HEX 4-40 NYL 2.00"L (4813K-ND) | Digikey | $0.528 | 4(10) | http://www.digikey.com/product-detail/en/4813/4813K-ND/255350 |
HEX NUT 1/4" 4-40 100/PK (H216-ND) | Digikey | $0.0149 | 100 | http://www.digikey.com/product-detail/en/HNZ%20440/H216-ND/5738 |
MACHINE SCREW PAN PHILLIPS 4-40 (H542-ND) | Digikey | $0.0886 | 100 | http://www.digikey.com/scripts/dksearch/dksus.dll?keywords=NY+PMS+440+0025+PH |
AdaFruit RGB LCD Shield kit | AdaFruit | $24.95 | 1d | http://adafruit.com/products/714 or http://adafruit.com/products/716 |
Premium Female/Female Jumper Wires - 40 x 6" | AdaFruit | $6.95 | 1d | https://www.adafruit.com/products/266 (Handy if adding a display) |
Liquid Tight Strain Relief | Alliedelec | $3.20 | 2 | 11-21 mm or 14-25 mm or 14-25 mm black |
Nut for Strain Reliev | Alliedelec | $0.68 | 2 | PG-29 Nut Grey or PG-29 Nut Black |
Shipping costs DigiKey, AdaFruit, StayOnline | ~$25.00 | 1 | ||
Crimp Connectors/PCB connectors | various | ~$10.00 | 1 | |
Hardware (nuts & bolts) | various | ~$5.00 | 1 | |
USBtinyISP AVR Programmer Kit-USB SpokePOV Dongle | AdaFruit | $22.00 | ? | http://www.adafruit.com/products/46 (Optional) |
Parts Cost
Parts for 1 to 3+ builds
- $150.00 - OpenEVSE 1x v4 plus
- $293.42 - leviton.com - 2x 30 Amp J1772 Connector with 25 Ft. Cord
- $ 80.64 - stayonline.com - 2x L6-30 Cord 6 Feet
- $188.00 - digikey.com - Relays, Breakers, Current Sensors, Enclosures
- $25.00 - adafruit.com - 1x RGB LCD Shield Kit w/ 16x2 Character Display
- $ 36.30 - alliedelec.com - 4x Strain Relief, 10x Nuts
- $ 73.04 - digikey.com - Stand Offs, Screws, Nuts, Terminal Blocks
- $853.96 - Total
- $50.00 - adafruit.com - 2x RGB LCD Shield Kit w/ 16x2 Character Display
- $300.00 - OpenEVSE 2x v4 plus
- $150.00 - leviton.com - 1x 30 Amp J1772 Connector with 25 Ft. Cord
- $ 40.00 - stayonline.com - 1x L6-30 Cord 6 Feet
- $1393.96 - Total including Remaining parts for 3 units (464.65 each)
Assembly
Build Photos
- 20121220 013644.jpg
5 strike