From SeattleEVA

Where am I able to get some of this 1050 mah cells part# LGQ863448H

I'm not sure, these were surplus cells. I'm sure that you can find a similar sized cell elsewhere with a different part number, just be sure that you test cycle a few before building a full pack as they don't all perform the same. My application required a peek of 50A so with my parallel set of 12 cells each cell must survive 4A of discharge current for a few seconds. But on average I need 12A continuous, so each cell needs to deliver 1A continuously, so test cycle them under a 1A load to determine their capacity at that rate, if they don't deliver enough energy then they won't work for this type of application. Alternately you could look into some newer cells such as A123 or Emoli1, See the Li page. Good luck. --Rjf 00:18, 13 August 2007 (CDT)