|
This page you are viewing is part of the SEVA Wiki Archive, Please visit the new Official Website! |
|
Difference between revisions of "User:Rjf/Prius Modifications"
< User:Rjf
Jump to navigation
Jump to search
| Line 23: | Line 23: | ||
* Whilst still in "P" floor the gas pedal two times | * Whilst still in "P" floor the gas pedal two times | ||
* Select "N" floor the gas pedal two times. | * Select "N" floor the gas pedal two times. | ||
| − | * Select "P" floor the gas pedal two times. | + | * Select "P" floor the gas pedal two times.<br>(LCD display will indicate a !Car! in upper left corner of screen) |
| − | |||
* Turn key directly to "start" to start the engine (brake+start) | * Turn key directly to "start" to start the engine (brake+start) | ||
| − | |||
== EV mode H14/#27 == | == EV mode H14/#27 == | ||
Revision as of 06:04, 17 August 2005
This is all entirely unofficial and I am not modifying the Prius untill the Insight is back on the road.
http://autos.groups.yahoo.com/group/toyota-prius/message/75790
Contents
Reminder Light Reset
- Cycle ODO/TRIP, stopping on ODO.
- Power off
- Power on, while holding the ODO button
- wait for reminder light to go out, then release.
Disabling Reverse Beep
- Cycle ODO/TRIP, stopping on ODO.
- Power off
- Power on, within 6 seconds, hold ODO for at least 10 seconds.
- While still holding ODO shift into Reverse and back into Park.
- "b-on" shows on display, press ODO to cycle to "b-off".
Disabling Traction Control
- Follow the sequence below (quickly - within 60 seconds)
- Set Ign switch to ON (Power button twice)(do not start to READY)
- Whilst still in "P" floor the gas pedal two times
- Select "N" floor the gas pedal two times.
- Select "P" floor the gas pedal two times.
(LCD display will indicate a !Car! in upper left corner of screen) - Turn key directly to "start" to start the engine (brake+start)
EV mode H14/#27
info@edrivesystems.com Get an "EnergyCS CDU"!!
Tachometer
No can do, unless you know otherwise, OBD info is probably as close as it gets.
Touch screen diags
- Hold "Info" button while turning the lights on and off 3 times.
- While in the 'Diagnosis Menu', pressing the upper-left corner than the lower-right corner on the screen will give you the 'Pdm' menu
- Tru the 3x light switch again while in Pdm screen.
